Place data boxes along the top or bottom of a section view grid to annotate the various section lines with level data, vertical or horizontal geometry points, superelevation, or pipe network data. You can also group a set of commonly used data boxes into a band set that can be applied to a section view as a single selection.
Tutorial: Adding a Data Box to a Section View
- In the section view, click the section view grid.
- Right-click the section view. Click .
- In the Section View Properties dialog box, click the Bands tab.
- In the List Of Bands area, select either Bottom or Top as the location for the new band in the section view.
- Select a band type and style. Click Add.
- To add more bands to the section view, repeat Steps 4 and 5.
- Optionally, on the right side of the List Of Bands, move selected bands up
or down 
in the stack. To delete any unwanted bands, click 
. - To save this arrangement of bands as a set for reuse, click Save As Band Set.
- Click OK to close the Section View Properties dialog box. The bands are displayed in the section view.
Note: To label corridor lane widths, create a corridor, build a corridor surface using EC (edge of carriageway) feature lines, and label that surface with an appropriate section segment band. For more information, see About Creating and Editing Section Views and Understanding Corridor Modeling.