Use this dialog box to add slope markings between a set of corridor feature lines.
- Add Slope Marking >>
-
Adds a slope marking to the corridor. You are prompted to select the feature lines that define the slope marking.
-
-
Deletes the selected slope marking.
The properties table contains the following columns:
- Index
-
Displays a numerical identifier for the slope marking.
- Feature Line1
-
Displays the point code of the first feature line selected to define the slope marking.
- Feature Line2
-
Displays the point code of the second feature line selected to define the slope marking.
- Slope Marking Style
-
Specifies the slope marking style. Click
and select a style in the Pick Style dialog box or use the standard style creation tools to edit or create a style. - Baseline
-
Displays the feature line’s corresponding baseline.
- Chainage Start
-
Specifies the start chainage for the slope marking display. To edit the chainage start, enter a value or click
to select a location in the drawing area. - Chainage End
-
Specifies the end chainage for the slope marking display. To edit the chainage end, enter a value or click
to select a location in the drawing area.