To Transparently Use a Point Number to Specify a Point Location

You can specify a point location using a point number.

The system searches first in the active drawing, and then in the project, if applicable.

Only the northing and easting values from the specified point are used. If you want level values, you must enter or select a level.

1. When you are prompted to enter a point in a command, do one of the following:
   • Click Transparent tab Point panel Point Number Find.
   • Right-click to display the Transparent Commands context menu Point Number.
   • Activate the Transparent Commands toolbar and select Point Number .
   • Enter 'pn.
2. Enter a point number or a list of point numbers.

   You can specify a single point number, or you can specify multiple points by entering individual point numbers or ranges of point numbers separated by commas. For example, you could enter the following: 100-105, 603, 701-713.

3. If you are prompted, enter a level.

   If the point you specified in the previous step has a level, it is listed as the default level, and you can select it by pressing Enter. For more information, see To Enter a Level for a Transparent Command.

   Note: Level prompting for transparent commands is controlled by the Transparent Command setting Prompt For 3D Points. For more information, see About Transparent Command Settings.