About Junction Commands

The following table lists the junction-related Autodesk Civil 3D survey commands and briefly describes their functionality.

Note: These commands must be entered in the Survey Command Window. For more information, see Survey Command Window.

Command	Description
AZAZ [point 1] [whole circle bearing 1] [offset 1] [point 2] [whole circle bearing 2] [offset 2]	Calculates a whole circle bearing/whole circle bearing intersection
BB [point 1] [quadrant bearing 1] [quadrant 1] [offset 1] [point 2] [quadrant bearing 2] [quadrant 2] [offset 2]	Calculates a quadrant bearing/quadrant bearing intersection
LNLN [point 1] [point 2] [offset 1] [point 3] [point 4] [offset 2]	Calculates a line/line intersection
ARCAZ [point] [radius] [point 1] [whole circle bearing] [offset]	Creates an arc/whole circle bearing intersection
ARCB [point] [radius] [point 1] [quadrant bearing] [quadrant] [offset]	Calculates an arc/quadrant bearing intersection
ARCLN [point] [radius] [point 1] [point 2] [offset]	Calculates an arc/line intersection
ARCARC [point 1] [radius 1] [point 2] [radius 2]	Calculates an arc/arc intersection
SAVE [NORTH, SOUTH, EAST, WEST, 1, 2, ALL] (point) (description)	Saves the intersection point
SAVE [NEAR, FAR] (point) [reference point number] (description)	Saves the intersection point
SAVE PICK (point) (description)	Saves the intersection point
SQ [reference 1] [reference 2] [reference]	Calculates a square offset