To Create Lines by Specifying Whole Circle Bearings

From the start point (1), specify the whole circle bearing (2) and the distance (3).

1. Click Home tabDraw panelLine drop-downCreate Line By Whole Circle Bearing Find.
2. Select a temporary start point for the angle measurement by clicking in the drawing or by using the .P, .N, or .G point filters.
3. Specify a whole circle bearing by either clicking in the drawing or entering a value.
4. Specify the distance by either clicking in the drawing or entering a distance.
5. Continue to specify whole circle bearings and distances to define line segments. Or press Enter to return to the Line command prompt where you can use additional options to define the line.