Roundabout Properties: Sign

Select a sign in the right-hand pane and click Edit. The Sign dialogue box is displayed.

Select Enabled to display this sign.

Note: If you disable a sign in Roundabout Properties that is defined as mandatory in the standard, a design check exception will be generated.

You cannot edit the sign Name, Type, Country or Appearance.

Select the required Size from the drop-down list.

The Mounting Height is measured above the sign post datum which is specified in the Sign Location dialogue.

Use Mounting Offset to place a sign offset to the right or left of the sign post. This value defaults to zero.

If you wish to rotate this sign relative to others at the same location, then enter the Angular Adjustment. To rotate all signs at a location, enter the Angular Adjustment on the sign location.

Enter a Reference if required.

In all cases, the Max and Min values represent the limiting values from the adopted design standard.