Use this page to specify the properties of the data boxes associated with the profile view.
- Select Band Set
-
Specifies the set of band styles for the profile view. Provides standard controls you use to review or change the set.
Note: This control is disabled when multiple profile views are created as part of the plan production process.
List of Bands
- Location
-
Specifies either the top or bottom of the profile view. The table below this field shows current location of the bands in the current band style set.
- Band Type
-
Specifies the data box type: Profile Data, Vertical Geometry, Horizontal Geometry, Superelevation, Long Section, or Pipe Data.
- Style
-
Specifies the style for the band type.
- Profile 1/Profile 2
-
Specifies which profile or profiles supply the data for the band. For example, if two separate profiles are listed in Profile 1 and Profile 2 columns, then each chainage displayed in the band shows the level information for both profiles.
- Alignment
-
Specifies either the parent alignment of current profile view or the parent alignment of any superimposed profiles.
- Geometry Points
-
Specifies the geometry points to label. Click
to open the Geometry Points to Label in Band dialog box. - Data Source
-
Specifies the source of the data displayed in the band. The options displayed depend on the type of data box:
Pipe Data Box: Select a pipe network in the drawing file.
Long Section Box: Select a sample line group that is associated with the alignment in the profile view
This column is available only for pipe and long section boxes.
- Material
-
Specifies a material or list of materials for which data is displayed in a long section box. The options are generated using the properties of sample line groups that are associated with the alignment in the profile view.