Use this dialog box to export corridor points as COGO points.
- For Entire Corridor Range
-
Specifies that all points are exported for the entire length of the corridor.
- For User Specified Range
-
Specifies that points are exported for a certain range along the corridor. When selected, Select Baseline, Alignment Start, and Alignment End are available.
- Select Baseline
-
Specifies the baseline alignment from which to extract the points. Select a baseline or click
to select an alignment in the drawing. Available only if For User Specified Range is selected. - Alignment Start
-
Specifies the start of the range along the alignment from which to extract points. To edit the start point, enter a value or click
to select a location in the drawing. - Alignment End
-
Specifies the end of the range along the alignment at which to extract points. To edit the end point, enter a value or click
to select a location in the drawing. - New Point Group Name
-
Specifies the name of the point group that will contain all the extracted points.
- Select Point Codes To Create
-
Specifies the available point codes to create. Select the check box next to the point code to create the points for the specified point code. Clear the check box if you do not want to create the points.