To Use Slab/Roof Slab Offset Grips

Use this procedure to change the vertical and horizontal offsets of a slab or roof slab object in a 3D isometric view.

The offsets are the vertical and horizontal distances from the insertion point of the slab.

1. Select the slab.
2. Select the Vertical Offset or Horizontal Offset grip.
3. Enter a value to specify the desired offset distance, or move the cursor until the desired value is displayed, and then click.
   

   Changing the horizontal offset of a slab using the Horizontal Offset grip

   

   Changing the vertical offset of a slab using the Vertical Offset grip