To Remove a Vertex From a Material Boundary

Use this procedure to remove a vertex from a material boundary.

1. Select the elevation to which the material boundary has been assigned.
2. Click 2D Section/Elevation tabMaterial Boundary panelEdit In Place.

   The material boundary is highlighted and edit-in-place grips are displayed.

3. Right-click, and click Remove Vertex.
4. Specify the vertex points to remove.
5. Remove additional vertex points as needed.
6. Press Enter.
7. Select the material boundary again, right-click, and click Save Changes to save the changes you made, or click Discard All Changes to undo the changes to the material boundary.