Panel Wire Annotation Exception Data Fields to Report Dialog Box
Specifies which fields to include in the report, the field order, and the field labels.
Find
Command entry: AEPANELREPORT
Select Wire Annotation Exception from the report list. Run the report and click Change Report Format on the Report Generator dialog box.
List of Options
The following options are displayed.
Available Fields
Lists the available fields for the report, including fields added with the User Attributes command. Select a field from the list to add it to the report.
Fields to Report
Specifies the fields to display in the report, and the field order.
Remove
Removes the selected field from the Fields to Report list.
Remove All
Removes all the fields from the Fields to Report list.
Move Up
Moves the selected field up one spot in the Fields to Report list.
Move Down
Moves the selected field down one spot in the Fields to Report list.
Change Field Name/Justification
Specifies the field label and justification for the selected field.
Note: The vertical justification is used only when the report is inserted as a table.
Available Fields
TAGNAME
Component tag value
PIN
Terminal number on the wire connection attribute
WIRENO
Wire number
WTYPE
Wire layer
INST
Installation value
LOC
Location value
MOUNT
Mount value
GROUP
Group value
END1
Component tag and pin value on the From component based on the schematic wire network
END2
Component tag and pin value on the To component based on the schematic wire network
BLKNAME
Block name
DWGIX
DWGIX value, as listed in the FILETIME table of the project database, for the drawing where the component is located
HDL
Handle number of the component block
CATEGORY
Type of component (J = plug-jack connector, P = PLC I/O, C = cable marker, FP = Panel Footprint, FPT = terminal footprint)
PDESC
Wire connection description attribute value
SFX
Values of R or L; used for terminal block symbols where we identify the wire annotation attributes with an R or L for Right or Left of the symbol
SH
Sheet value (%S) for the drawing where the component is located
SHDWGNAM
Drawing value (%D) for the drawing where the component is located