Creates multiple viewports in model space.
Summary
The number and layout of active viewports and their associated settings are called viewport configurations.
List of Prompts
The following prompts are displayed.
Enter an option [Save/Restore/Delete/Join/Single/?/2/3/4] <3>: Enter an option
- Save
-
Saves the current viewport configuration using a specified name.
- Restore
-
Restores a previously saved viewport configuration.
- Delete
-
Deletes a named viewport configuration.
- Join
-
Combines two adjacent model viewports into one larger viewport.
The two model viewports must share a common edge of the same length. The resulting viewport inherits the view of the dominant viewport.
- Single
-
Returns the drawing to a single viewport view, using the view from the current viewport.
- ?—List Viewport Configurations
-
Displays the identification numbers and screen positions of the active viewports.
The lower-left and upper-right corners of the viewport define its location. For these corners, values between 0.0,0.0 (for the lower-left corner of the drawing area) and 1.0,1.0 (for the upper-right corner) are used. The current viewport is listed first.
- 2
-
Divides the current viewport in half.
- 3
-
Divides the current viewport into three viewports.
The Horizontal and Vertical options split the area into thirds. The Above, Below, Left, and Right options specify where the larger viewport is placed.
- 4
-
Divides the current viewport into four viewports of equal size.