To Chamfer a 3D Solid

  1. Click Modeling tab > Solid panel > Fillet Edge drop-down > Chamfer Edge.
  2. Select the edge of the base surface to chamfer.

    One of two surfaces adjacent to the selected edge is highlighted.

  3. Do one of the following:
    • To select a different surface, enter n (Next).
    • To use the current surface, press Enter.
  4. Specify the base surface distance.

    The base surface distance is measured from the selected edge to a point on the base surface. The other surface distance is measured from the selected edge to a point on the adjacent surface.

  5. Specify the location of the chamfer using one of the following options.
    • To specify an individual edge, select the edge.
    • To select all edges around the base surface, enter l (Loop). Specify an edge.
  6. To complete the chamfer, press Enter.