Exercise 1: Changing Parcel Style Display Order

In this exercise, you will control the display of overlapping parcel lines.

Parcel style display order in Autodesk Civil 3D controls which lot lines are visible where different types overlap.

Change parcel style display order

1. Open Parcel-3A.dwg, which is located in the tutorials drawings folder.
2. In Toolspace, on the Prospector tab, expand the SitesSite 1 collection. Right-click the Parcels collection. Click Properties.

   In the Parcel Style Display Order area, note that Single-Family parcels have the highest display order, which explains why their magenta lines cover the blue Standard lines.

   
3. In the Parcel Style Display Order list, select Standard and click to move it to the top of the stack.
4. Click Apply.

   After the model regenerates, notice that the blue Standard lot lines have overwritten the pink ones for Single-Family lots.

   
5. Repeat steps 3 and 4, but give the Property style the highest display order.

   This setting displays a light blue line around the extents of the site.

   

   Further exploration: Change the display order again, moving the Road (Local) parcels to the top of the display order, then moving them to a position between Standard and Single-Family. These settings change the display of the curved road edges.

6. Click OK.

To continue this tutorial, go to Exercise 2: Exporting Parcel Data.