Run a Fill+Pack analysis and learn how to use the Summary pane.
Before running a Fill+Pack analysis, set an injection location, select a material, and enter process settings.
Click (Home tab > Molding Process Setup > Analysis Wizard).
The Analysis Wizard dialog appears.
Select the Sequence tab. Clear the Gate Location analysis sequence checkbox, scroll down and select Fill + Pack from the Select analysis sequence list.
The Analysis information box displays a warning if there are any parameters required before this analysis can be run and outlines the analysis results.
Click Analyze
The analysis starts and the Model pane displays an outline of the model and simulates how the part is filled as the analysis progresses.
Click OK when the analysis is complete.
The Summary pane shows general and specific information about the model and the completed analyses. You can display additional information about some items within each summary tab.
In the General tab, click Analysis resolution.
A Help topic is displayed.
Click the tabs along the top of the Summary pane and look at the information provided in the analysis summaries.
Fill+Pack analysis results are listed in the Study Tasks pane.
Parent topic: Fill+Pack analysis (tutorial)
Previous topic: Find an injection location
Next topic: Viewing results