Select the molding process
In this task, you select the molding process and the analysis sequence, steps necessary to run a compression molding analysis.
Download the files for this tutorial from Autodesk Knowledge Network - Compression Molding tutorial.
- Click (Start & Learn tab > Launch panel > New Project).
- Type in Compression molding tutorial for the Project Name.
- Click OK.
- Click (Home tab > Import panel > Import).
- Select the Files of type drop-down list.
- Select Study files (*.sdy).
- Navigate to where you stored your tutorial files.
- Click the file compression_tutorial.sdy and click Open.
- Click (Home tab > Molding Process Setup panel > Thermoplastics Injection Molding) and select Reactive Compression Molding from the drop-down menu. For this tutorial you are selecting a reactive compression process because you are using a thermoset material. If you were selecting a thermoplastic material you would select Thermoplastics Compression Molding instead.
You are using the default analysis sequence for this molding process, which is Fill + Pack. Click the Next topic link below to move on to the next task of the tutorial.
Parent topic: Compression molding (tutorial)
Click the Next topic link below to move on to the next task of the tutorial.
Parent topic: Compression Molding
Next topic: Assign the properties of initial charge and compression elements