View and modify the parameters for rebar bending details.
| Parameter | Description |
|---|---|
| Graphics | |
| Detail Level | Specifies how the bending detail is represented in the view. |
| Representation | Specifies if the bending detail for closed contour bars is shown the same as the rebar, with offset segments, or as unfolded.
|
| View for 3D Shape | Specifies the view orientation for the bending detail representing 3D rebar shapes.
|
| Varying Rebar Set Dimensions | Specifies whether to show the values for the referenced bar in the set or the minimum and maximum values. |
| Dimensions | |
| Segment Length Dimensions | Specifies whether to show the length dimensions on the bending detail. |
| Linear Dimension Style | Specifies the linear dimension style to be used for segment length and arc length dimensions on the bending detail. |
| Straight Segment Lengths | Specifies whether to show the segment lengths using dimensions or text for the bending detail. |
| Arc Segment Lengths | Specifies whether to show the arc lengths using dimensions or text for the bending detail. |
| Dimension Text Position | Specifies whether the bending detail dimension text should always be on the exterior of the dimension line or positioned according to the dimension default.
|
| Dimension Offset | Specifies the bending detail dimension line offset with respect to the dimensioned segment.
|
| Hook Lengths | Specifies whether to show hook length dimensions for the bending detail. |
| Other Dimensions | Specifies whether to show other dimensions, such as orthogonal or overall dimensions, as defined in the rebar shape family. |
| Angular Dimensions | Specifies whether to show angular dimensions for the bending detail. |
| Angular Dimension Style | Specifies the angular dimension style to be used for the bending detail. |
| Angle Measurement | Specifies whether to measure the inside or outside angles between the bending detail segments.
|
| Show for Angles | Specifies whether to show the bending detail angle dimensions for all angles or just for angles greater or less than 90 degrees. |
| Angle Text Position | Specifies whether the bending detail angular dimension text should always be on the exterior of the dimension line or positioned according to the dimension default. |
| Angular Dimension Offset | Specifies the bending detail angular dimension line offset. The offset value is scaled with the view (e.g., 3 mm offset at 1:25 scale, equals 75 mm in the view).
  Dimension offset.
|
| Hook Angles | Specifies whether to show hook angular dimensions for the bending detail. |
| Bend Diameter Dimensions | Specifies whether to show the bar bending for the bending detail arc segments, using either radial or diameter dimensions. |
| Radial Dimension Style | Specifies the radial dimension style for the bending detail. |
| Diameter Dimension Style | Specifies the diameter dimension style for the bending detail. |
| Dimension Type | Specifies whether to show the bar bending using either radial or diameter dimensions for the bending detail. |
| Segment Bends | Specifies whether to also show the segment bend dimensions for the bending detail. |
| Hook Bends | Specifies whether to also show the hook bend dimensions for the bending detail. |
Unfold.
Offset.