Use the Drawing dialog box to define the geometry of the spring in the drawing.
|
Thickness Specifies the thickness of the sheet, which creates one belleville segment |
|
Chamfer Inserts a chamfer on the last belleville segment, to increase the contact area between the washer and the base. You can only select the chamfer option, when the thickness of the Belleville segment, t, is greater than 6.4 mm. |
|
De Specifies the external diameter of the Belleville spring segment. |
|
Di Specifies the internal diameter of the Belleville spring segment. |
|
n Specifies the number of spring segments in one packet. |
|
i Specifies the number of packets in the spring. Each packet contains parallel segments. |
|
Pushing of Spring Specifies the maximum compression of one spring segment. |
|
Size of Segment Specifies the calculated thickness of one spring segment. |
|
Total Length Specifies the calculated total length of the whole spring. |