|
Material Specifies required material in accordance with the selected standard |
|
Thickness Specifies thickness of the sheet, which creates one belleville segment. |
|
Chamfer check box You can only select this check box, when the thickness of the Belleville segment “t” is greater than 6.4 mm. These thicknesses make it possible to insert a chamfer on the last Belleville segment, to enlarge a contact area between washer and basis. |
|
De External diameter of the Belleville spring segment. |
|
Di Internal diameter of the Belleville spring segment. |
|
n Specifies overall number of rows in one packet. |
|
i Specifies number of packets (each packet contains more parallel segments) in the spring. |
|
Pushing of Spring Maximal compression of one spring segment. |
|
Size of Segment Calculated thickness of one spring segment. |
|
Total Length Calculated total length of whole spring. |