Use the Shaft Modified Design dialog box to enter specific values for a profile. Depending on the installed standard systems and the type of the selected profile, different dialog boxes for specifying the geometrical values are displayed.
Description
Represent the selected profile type and the current size.
Number of Splines
Enter a value for the splines.
Internal Diameter
Enter a value for the shaft inner diameter or select the Measure option on the context menu to determine the diameter by specifying two points in the drawing.
External Diameter D=
Enter a value for the shaft diameter or select the Measure option on the context menu to determine the diameter by specifying two points in the drawing.
Width of Splines B=
Determines the spline width.
Length l=
Enter a value for the length of the profile section or select the Measure option on the context menu to determine the length by specifying two points in the drawing.
Standard Sizes
Opens the Standard dialog box for the selected profile.