To select the probe for OMV inspections

Specify the probe with which you want to carry out an OMV inspection.

Note: The Probe area is available only when creating inspections for OMV machines. To specify the probe details for CNC and Manual inspections, use the Probe head area.

1. In the Machine tab, click the Probe area.
2. Select a probe from the list. The probe is displayed in the CAD View.

   If the head is not shown, click View tab > View Options > Machine arrow > Show/Hide Probe to display it.

3. If the probe in the CAD view is not aligned with the head of the measuring device, use the RX, RY, and RZ boxes to rotate the on-screen head to the same orientation as the device head.