Creating a 360-degree conical wrap

There are three stages to creating a 360-degree wrap on a cone shaped object.

1. Conical wrapping can only be done as a rewrap, so firstly it must be unwrapped. Unwrapping flattens the shape so the additional relief can be added. To unwrap the cone, create a Cone Primitive to guide the conical projection of the unwrap.
2. Create the pattern on the unwrapped curves.
3. Rewrap the additional detail onto the model.

The cone shaped top on the bottle shown below is an example of where 360-degree conical wrapping can be used.

Note: 360-degree conical wrapping is not available for solid wrap features or for wrapping wireframes.