PLANTISOTBDRAWAREA

Designates draw and no-draw areas in an Iso drawing.

Access Methods

 Ribbon: Project SetupIsometric DWG SettingsTitle Block Setup Isometric Drawing Area

 Command entry:  plantisotbdrawarea

Summary

In the Title Block Setup, you can create and modify areas for Iso drawings. A draw area specifies the limit area that Iso objects are created in. No-draw areas can be placed within the draw area to specify that Iso objects should not be created within the no-draw area.

A table area is created automatically when you create your first table. You can stretch the draw area.

You can create one draw area. You can create one or more no-draw areas.

List of Prompts

If a draw area does not exist in the table editor, you are prompted to create one.

Specify first corner point: Specify the first corner of a draw area.

Specify other corner point: Specify the second corner of a draw area.

Replace draw area or [Replace draw area/add No-draw area/toggle Visibility]:

Area

Controls the drawing area in your isometric drawings.

Replace Draw Area

Specifies the area to create objects in the isometric drawing.

Add No-draw Area

Specifies areas to exclude objects from in the isometric drawing.

Toggle Visibility

Displays draw-area as a perimeter instead of draw and no-draw rectangles. Draw areas can be selected only when rectangles are displayed.

Visibility

Controls the visibility of the drawing area in your isometric drawings.

Toggle Visibility

Draw area visibility on.

Draw area visibility off.

Displays draw-area as a perimeter instead of draw and no-draw rectangles. Draw areas can be selected only when rectangles are displayed.