InfoAsset Manager assumes that most organisations will normally work with just one CCTV coding scheme. For this reason the coding standard is applied at the database level by default. However, it is possible to override the database coding standard on a per network basis.
InfoAsset Manager supports several different CCTV Survey coding schemes. The available coding schemes are:
Details of these coding schemes and their associated methods of defect scoring can be found in the table below.
PACP |
LACP |
EU |
EU 2011 |
MSCC |
CH2M HILL SCREAM™ |
NZWWA | NZWWA4 |
WSAA |
WSAA2 | WSAA3 | WSAA4 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
File Format |
Microsoft Access (as defined by PACP) |
Microsoft Access (as defined by LACP) |
|
|
|
- |
CleanFlow | CleanFlow |
- |
- | - | - |
Codes |
PACP |
LACP |
EU |
EU2011 |
MSCC |
CH2M HILL SCREAM™ |
NZWWA | NZWWA4 |
WSAA |
WSAA v2.2 | WSAA v3.1 | WSAA v4.1 |
Scoring Scheme |
PACP |
LACP |
WRc SRM 4 WRc SRM 5 |
CH2M HILL SCREAM™ |
NZWAA | NZWAA4 |
WSAA |
WSAA2 | WSAA3 | WSAA4 | ||
Current Supported Version |
v4.2.0 - v7.0.3 |
v4.4.0 - v7.0.3 |
EN13508-2:2003 EN13508-2:2004 |
EN13508-2:2003+A1:2011 |
v4.0 |
Version dated 28th August 2006 |
Pipe inspection manual 3rd Edition May 2006 |
NZ Gravity Pipe Inspection Manual 4th Edition 2019 |
WSA 05-2002 |
WSA 05-2008-2.2 | WSA 05-2013-3.1 | WSA 05-2020-4.1 |
To change the current CCTV standard for the database:
To change the current CCTV standard for the current network:
Most choice lists can be edited in the Standards and Choice Lists dialog. By default, choice lists defined by the selected CCTV Standard are read only. The read only status of these choice lists can be overridden, allowing existing choices to be edited and user defined choices to be added.
See the User Defined Choice Lists topic for more information.