Open an IFC File

When you use Revit to open (import) an IFC file, Revit creates a new model using the default template. This is not fully supported by bSI or Revit and use should be with caution. Current IFC exchange standards do NOT enable accurate, full, 1:1 translation of element and geometry data from the source application to Revit categories, families, parameters, and geometries.

Note: It is preferable to use the IFC file as reference information for an existing model, using the Link IFC tool.
  1. (Optional) Before opening an IFC file, use the Import IFC Options dialog to do the following:
    • Select a default template to use for IFC files.
    • Note: If a default template is not selected, the first template listed under File Locations in Revit Options dialog will be used.
    • Use the RevitLoad command to select an IFC class mapping file.
    • The IFC file may or may not contain the geometric data needed for translating to native Revit capabilities that you plan to use for further editing/modeling. As mentioned above, this is a known IFC support issue. For more information, see About Imported Geometry.
  2. Click File tab Open (IFC).
  3. In the Open IFC File dialog, navigate to the IFC file to import, and select it.

    If needed, specify the type of file to open: ifc, ifcXML, or ifcZIP.

    Note: If an IFC file includes large or excessive negative Cartesian coordinates, geometry may not appear in the expected position when opened or linked in Revit. Whenever possible, use the source application to adjust the origin and/or coordinate system to reduce negative coordinate values before exporting the IFC file.
  4. (Optional) If you do not want elements to join automatically, clear Auto-Join Elements.
    Note: When this option is selected (the default), walls automatically join to other walls or to columns. Clearing this option results in unjoined walls but may improve performance of the import process and give you more control over the results.
  5. (Optional) The Correct lines that are slightly off axis option (selected by default) automatically corrects lines that are slightly off-axis (less than 0.1 degree) and helps avoid problems with Revit elements generated from those lines. You may want to clear this option when importing a site plan.
  6. Click Open.

    For information about the results of the open (import) process, see the log file named <ifc_file>.ifc.log in the same folder as the original IFC file.