You can use information from Industry Foundation Classes (IFC) files in
Revit models.
To use IFC files in a model, do one of the following:
-
Link the IFC file to an existing
Revit model. Linking allows you to reference the data in the IFC file into the
Revit model for additional design work. Linking also allows changes/updates to the original IFC file to be automatically updated in the Revit model.
This is the preferred and fully supported method of using IFC files.
-
Open (import) the IFC file in
Revit to create a new model that uses the IFC data as a starting point. Because the imported IFC file is not linked, any later changes to the original IFC file are not reflected in the
Revit model.
This method is not fully supported and should be used with caution. When you open (import) an IFC file,
Revit attempts to convert IFC elements and geometry into native
Revit families, categories, parameters, and geometry as accurately as possible. However, current IFC exchange standards (IFC2x3 CV2.0 , IFC4 RV1.2, and IFC4.3 RV) do not contain enough information to support a complete, accurate, 1:1 translation from the source application into
Revit.
Revit supports the linking of IFC files based on buildingSMART International (bSI) IFC2x3, IFC4, and IFC4.3 schemas. Information on certified import can be found at
https://www.buildingsmart.org/compliance/software-certification/ifc/.
Before linking (or opening) an IFC file, you can specify the template to use, load a file that maps IFC classes to
Revit categories, and manually override Revit categories for IFC classes.
IFC File Best Practices
Link IFC files when you need to reference external model data while continuing design work in Revit. Linking preserves the IFC file as a reference and allows your Revit model to stay synchronized with updates. For example, if another team provides an architectural model as an IFC file, you can link it into Revit and use it as a reference while designing mechanical, electrical, or structural systems.
When an IFC file is linked:
- You cannot edit the IFC elements directly in Revit.
- You can view and coordinate against the IFC geometry to continue design work.
- Updates made to the original IFC file can be reflected in Revit by reloading the link.
This workflow is the preferred and fully supported method for working with IFC files in Revit.
Accessing the IFC File in Revit
After you link an IFC file, you can manage and control it from the following locations in Revit:
Referencing Elements in the IFC File
While linked IFC files are read-only in a Revit model, you can use them as references to do the following:
- Dimension to references of IFC elements. (These references apply to the faces of linked IFC geometry and not to center lines, reference planes, or other non-geometry elements.)
- Snap to IFC-based elements.
- Align Revit elements to IFC-based elements.
- Host some face-based families, such as conduit and some electrical devices. (This hosting does not include wall, roof, or floor-specific hosted families. For example, you cannot insert a door or a window into a linked IFC wall).
- Tag the IFC elements. See
Tagging Elements in Linked Models.
If the IFC file changes and you reload it into the Revit model, verify previously established references. Some changes to IFC geometry may make it difficult to maintain references and associated dimensions in the Revit model.
Defining Room Boundaries with IFC-Based Elements
When creating rooms in the host model, you can use many IFC-based elements to define room boundaries, including walls, roofs, floors, ceilings, columns, doors, and windows. IFC-based walls use the wall finish face as the room boundary.
Note: You cannot use IFC-based curtain elements to define rooms. If needed, add room separation lines along the boundaries of curtain elements. See
Add a Room Separation Line.
When you link an IFC file, by default its Room Bounding property is turned off. To enable room bounding for all elements in the IFC file that support it, see
Use Room Boundaries in a Linked Model.
Assigning Phases for IFC-Based Elements
When you link an IFC file, its elements are assigned to a default construction phase in the Revit model. That phase is used for the Phase Created property of the elements in the linked IFC file.
Specifically, the assigned phase is determined by the starting view of the template used during the IFC Import/Link operation. See
Specify the Starting View for a Model and
Select a Template for IFC Files.