To set up CAMduct to use a generic decoiler machine, specify the generic machine file (generic64.dpl) located in the C:\Program Files\Autodesk\Fabrication 2016\CAMduct\DPLs folder.
This file (generic64.dpl) produces a generic text file output that lists the straight items that need to be cut.
-
Click File
Setup Installed Decoiler. 
A blank Installed Decoiler dialog displays, unless a previous decoiler has been installed.
- Give the generic decoiler a name, such as AUTOFOLD, then click the Browse button.
- Select the generic64.dpl file, which is typically located in the C:\Program Files\Autodesk\Fabrication <version>\CAMduct\DPLs folder, and click Open.
The following dialog displays:
The generic64.dpl file produces a generic text file output that lists the straight items that need to be cut.
Generic decoiler, and most other decoilers, do not output the coil number, so the Coil tab is ignored.