CAMManager.get Method

This sample script demonstrates three different methods for feature recognition: one for holes and two for pockets.

The script starts by creating a simple component which is then used to demonstrate the three methods. After the features are recognized, they are colored and milling and drilling operations are created for each feature.

RecognizedHoleGroup returns a list of BRepFaces that can be used as selections for the drilling operation. RecognizedPocket also returns some BRepFaces but it needs additional processing before the output can be used for creating machining operations.

The sample script demonstrates a couple of different methods, including finding the pocket BRepFaces and creating sketches from the recognized pockets.

This script works only if the Manufacturing Extension is active.

Manufacturing Workflow API Sample. This sample script starts by creating a simple component, which is then used to describe a milling workflow. It creates a setup and a few operations, picks tools from a Fusion sample tool library using loops and queries, and post-processes the operations using an NC program.

Demonstrates posting toolpaths in the active document using an NC program: import a post configuration from the post library, choose which setups or operations to include, set NC program and post parameters, and run NCProgram.postProcess.

Before running: Run from Scripts and Add-Ins with a design that contains at least one CAM setup with toolpaths. The script prompts for what to post (all setups, first setup, or first operation) and optionally opens the NC file when complete. It may offer to switch to the MANUFACTURE workspace.

Turning Workflow API Sample. This sample script starts by opening a simple component, which is then used to describe a basic turning workflow. It creates a setup and a few operations, picks tools from a Fusion sample tool library using loops and queries, and post-processes the operations using an NC program.