Parameters to position the subspindle over the part in the main spindle.
Once the Subspindle has moved to the Feed Plane (Clearance), this is the feedrate to move to the Chuck Plane (final depth to grab the part).
Forces a spindle stop during the chucking process.
Stops both spindles during subspindle transfer.
If the spindle is not stopped, you can set the RPM to synchronize the two spindles.
Allows you to create an angular shift between the 0° reference position of the part. You can enter an angle to shift the second spindle reference.
Enable to activate the part catcher. Only available if your machine has a parts catcher and your post supports a part catcher.
Enter a time for the operation to dwell. Dwelling pauses axis movements while the spindle revolves at the specified rpm. Use dwelling to clear chips before retracting from a hole and to improve the hole finish. Typically, set a dwelling time between 1/4 second and 1 second.
Specifies the conditions of the chucks during the retract process.
The position that the chuck rapids to, before feeding to the clamping position.
Set this height to control the reference position for the Offset.
Sets the distance to shift the Feed Plane.
The position that the chuck feeds to, before clamping the part.
Set this height to control the reference position for the Offset.
Sets the distance to shift the Chuck Plane.
Contains a turning toolpath within a region using confinement boundaries.