Print reference (Drawing workspace)
Prints sheets in a drawing in the Drawing workspace in Fusion.
Application Bar > File 
> Print
Printer Setup
Lets you choose a printer and set the print properties.
Printer Name
Specifies the printer. To change the printer, click the arrow and then choose from the list.
Properties
Opens the Properties dialog box where you can set the print properties
Paper Size
Lets you choose a paper size supported by the selected printer.
Print Range
Specifies the sheets to print.
Current Sheet
Prints the active sheet in the drawing.
All Sheets
Prints all the sheets in the drawing.
Sheets in Range
Prints the range of sheets specified in the Define Range box.
Print Preview
When checked, displays the print preview.
Previous
Displays the preview of the previous sheet when the range is defined.
Next
Displays the preview of the next sheet when the range is defined.
Settings
Lets you set the orientation, number of copies and whether line widths are printed or not.
Orientation
Sets the orientation of the print.
- Portrait: Sets the print orientation to portrait.
- Landscape: Sets the print orientation to landscape.
Print Line Widths
When checked, the defined line widths will be printed.
Number of Copies
Sets the number of copies to print. Use the arrows to set the number of copies or enter the number in the box.
Scale
Sets the scale between the sheet size specified in the drawing and the paper size in the printer.
When printing at a 1:1 scale, make sure the paper matches or is bigger than the sheet size. If the paper is smaller, a portion of the sheet will not print.
Offset
Lets you enter the values to offset the print on the sheet in the X and Y direction. The default values are 0 for both X and Y so there is no offset applied.