2-axis cutting parameters

Parameter	Details
Cutting Direction	Sets a tool orientation for a cutting operation with reference to the Global Coordinate System. Click X, Y, or Z to orient the cutting tool in the direction parallel to the X, Y, or Z axis of the triad, respectively. Note: You can select only one direction.
Minimum Wall Thickness	Attempts to enforce the minimum thickness of a wall or rib after cutting. Wall thickness refers to the thickness of features in the cutting plane, that are perpendicular to the Cutting Direction. Tip: To support enforcing this parameter: When placing obstacle bodies, make sure that there is enough space between them to generate geometry of the specified minimum thickness. Avoid placing obstacle bodies close to regions that may be thin in a generated outcome. .

Parameter

Details

Cutting Direction

Sets a tool orientation for a cutting operation with reference to the Global Coordinate System.

Click X, Y, or Z to orient the cutting tool in the direction parallel to the X, Y, or Z axis of the triad, respectively.

Note: You can select only one direction.

Minimum Wall Thickness

Attempts to enforce the minimum thickness of a wall or rib after cutting.

Wall thickness refers to the thickness of features in the cutting plane, that are perpendicular to the Cutting Direction.

Tip: To support enforcing this parameter:

When placing obstacle bodies, make sure that there is enough space between them to generate geometry of the specified minimum thickness.
Avoid placing obstacle bodies close to regions that may be thin in a generated outcome.

2-axis cutting parameters

Related pages