Extrude reference (Form)

The Extrude command extrudes an open or closed sketch profile or planar face to create or modify a T-Spline body in Fusion.

Note: When you invoke the Extrude command, and there is only one profile visible in your design, it is automatically selected.

Design > Form > Create > Extrude

Profile

Enables the selection of sketch profiles.

Specifies whether to include tangentially connected edges or select individual edges for open profiles.

Specifies how the faces are positioned on the extrusion.

Uniform Spaces faces evenly around the profile.
Curvature Faces are distributed based on the curvature of the profile. Higher curvature areas receive more faces.

Specifies the number of faces along the extrusion.

Specifies the extrusion distance. There are two Distance fields for a two side extrusion.

Specifies the angle to taper the extrusion.

Specifies the method to control the size of the extrusion

One Side Creates the extrusion in one direction.
Two Side Creates the extrusion in both directions. Each direction can have a different extrusion length.
Symmetric Creates the extrusion in both directions. Each direction has the same extrusion length.

Specifies the number of faces.

Available when Direction is set to Symmetric. Maintains the symmetry of the extrusion.

Select to create a new body in the active component or a new body.