Export a study to Ansys® Setup (Simulation workspace)

If you want to create a Fusion Simulation data file that can run in Ansys products, export your study from the Simulation Workspace as a Fusion Simulation data (.sdz) file.

To create the Fusion Simulation data (*.sdz) file

1. In the Simulation workspace, create a new simulation study.

   Note: If you want to create a static stress study from your generative design outcome, see Setup from a generative design outcome.

2. On the Setup tab, click Ansys panel > Export Study to Ansys® Setup to open the Export to Ansys Setup dialog.

   Note: The same study that was set up in Fusion is created automatically, although some loads and constraints may need to be recreated in Ansys Mechanical, see Working with Ansys.

3. Enter an appropriate name, and select where you want to save the file, then click Save to create the .sdz file.

   • Save to a Fusion project in the cloud

     Note: You can share this file with a colleague via the Fusion web client

   • Save to your computer

To share the file using the Fusion web client

In the Fusion Quick Access Toolbar, click Show Data Panel to open the Data Panel, then navigate to the project where you saved your .sdz file.

• If your colleague has Fusion or access to the Fusion web client, select the People tab at the top of the Data Panel to open it, then type their email address to invite them to your project.
• If your colleague does not have Fusion or access to the Fusion web client, click on the project name adjacent to at the top of the Data Panel, to open the Fusion web client. Click on the down arrow associated with the .sdz file and select Share from the drop-down list, to copy a link to the file that you can send to them.

To open the file in Ansys Mechanical

1. In Ansys Mechanical 2021 R1, or later, click Extensions > ACT Start Page.
2. Click Extensions > Manage Extensions to open the Extensions Manager.
3. In the Extensions Manager dialog, check the ExternalStudyImporter box, then click Close.
4. In ACT Home, click Launch Wizards to open the wizard.
5. In Wizards, click External Study to run the wizard.
6. In the External Study Importer, select Fusion Simulation as the Study Type, then browse to the location where the .sdz file is saved and select it as the File to Import.
7. Click Import to run the conversion that opens the .sdz file in Ansys Mechanical.
8. When the conversion is complete and the static stress study is open in Ansys Mechanicl, click Finish to close the External Study Importer.

To open the file in Ansys® Discovery™

1. In Ansys Discovery 2021 R2, or later, select the Autodesk Import tab.
2. Click Import SDZ file to open Windows explorer.
3. Navigate to the location of the *.sdz file and select it to open it in Ansys Discovery.