Create mockup section views

Specify section planes to create cut views of the model.

1. On the toolbar, click Section.
2. To specify a section plane, in the Section Plane dialog box:
   • Click a Plane button to select the XY, XZ, or YZ plane.
   • Click Select, and then in the graphic window, select a planar face.
3. Set position of the section plane:
   • In the graphic window, use the arrow manipulator to move the section plane, or use dot manipulators to rotate the section plane.
   • In the graphic window, select a manipulator, and then in the Section Plane dialog box, specify the distance or angle.
4. To change orientation of the section view, click Flip.
5. To define another section plane, click New Section Plane.

   Then specify the section plane properties.

6. To suppress a section plane, clear the check mark in front of a section plane name.
7. To end the Section command:
   • Click OK to confirm the current section view and exit the command. The section view is preserved in the graphic window but is not saved in the mockup file.
   • Click Share to save the current section view in a shared view. The shared view is added to the Views folder.
   • Click Cancel to exit the command without saving the section view.