Change the Simulation Compute Manager Storage path - workstation

The following process updates the location of a storage path for Simulation Compute Manager. You will require root or sudo access to stop the services and to perform edits to the configuration files. For this example, the new location will be referred to as /tmp/newlocation

The new storage path directory should have the following characteristics:

• It can be written to by the Simulation Compute Manager user.
• It is on a volume with sufficient capacity to hold the jobs that you plan to run.
• It is on a volume that is present when the Simulation Compute Manager starts (or will automount when needed).
• It is not accessible to other Simulation Compute Managers running on other hosts.
• It persists after a reboot of the machine.

Note: Any running jobs will be terminated

(In the following instructions, inside adskscmX and scmX, X should be replaced with SCM major release)

1. Create the new location with the properties outlined above.

2. Stop the Simulation Compute Manager with sudo systemctl stop adskscmX

3. Open the file /usr/lib/systemd/system/adskscmX.service in a text editor. This will require root or sudo access.

4. Insert the following after the line PIDFile="/var/lock/scmX.pid.lock" (approximately at line 9)

    #Change the SCM default storage path

5. Reload the Simulation Compute Manager with the command sudo systemctl daemon-reload

6. Restart the Simulation Compute Manager with the command sudo systemctl start adskscmX