Edit the information in the Configuration Report.
Find
Command entry:
AEDWGCFG
Click Edit Mode.
If you edit the information in the Configuration Report, you have an option to update the project and drawings with the new information. Re-order the lines with the Move Up, Move Down, Move to Top, and Move to Bottom buttons. If you re-order the lines, the order of the drawing list in the project file (.WDP) can be updated to match.
|
Move Up |
Moves the currently selected lines up one place in the report. |
|
Move Down |
Moves the currently selected lines down one place in the report. |
|
Move to Top |
Moves the currently selected lines to the top of the report. |
|
Move to Bottom |
Moves the currently selected lines to the bottom of the report. |
Edit
Edits the values of the currently selected line. Double-click any line to go directly into edit.
|
DWGNAM |
Specifies the drawing name. |
|
SEC |
If you change any of the Sec data, the Section data held in the project file (.WDP) can be updated to match. |
|
SUBSEC |
If you change any of the SubSec data, the Sub-Section data held in the project file (.WDP) can be updated to match. |
|
SH |
If you change any of the SH data, the Sheet (%S) field for that drawing can be updated to match. |
|
SHDWGNAM |
If you change any of the SHDWGNAM data, the Dwg no. (%D) field for that drawing can be updated to match. |
|
IEC_P |
If you change any of the IEC_P data, the IEC Project (%P) field for that drawing can be updated to match. |
|
IEC_I |
If you change any of the IEC_I data, the IEC Installation (%I) field for that drawing can be updated to match. |
|
IEC_L |
If you change any of the IEC_L data, the IEC Location (%L) field for that drawing can be updated to match. |
|
SH-DESC |
If you change any of the SH-DESC data, the Description data held in the project file (.WDP) can be updated to match. |