Modify project settings for various component styles.
Find
Command entry:
AEPROJECT
All information defined in this tab is saved to the project definition file as project defaults and settings.
In the Project Manager, right-click on the project name and select Properties. Select the Styles tab.
|
Arrow Style |
Specifies the default wire signal arrow style. Select from the four predefined styles or a user-defined style. You can override the default style setting at insertion time. |
|
PLC Style |
Specifies the default PLC module style. Select from the five predefined styles or a user-defined style. |
|
Fan-In/Out Marker Style |
Defines the default Fan In/Out marker style and the layers for wires going out of a Fan In/Out Source marker and those coming into a Destination marker. |
|
Layer List |
Lists the Fan In/Out layers. |
|
Add |
Defines layer names as Fan In/Out layers. |
|
Remove |
Removes the selected layer from the defined layer list. |
|
Wire Cross |
Specifies the default mode of operation when wires cross each other: insert gap with no loop, insert gap and loop, or solid (no gap). |
|
Wire Tee |
Specifies the default wire tee marker: none, dot, angle1, or angle2. |