Controls the filling of objects such as hatches, 2D solids, and wide polylines.
List of Prompts
The following prompts are displayed.
Enter mode [ON/OFF] <current>: Enter on or off, or press Enter
- On
-
Turns on Fill mode. For the filling of a 3D object to be visible, its extrusion direction must be parallel to the current viewing direction, and hidden lines must not be suppressed.
- Off
-
Turns off Fill mode. Only the outlines of objects are displayed and plotted. Changing Fill mode affects existing objects after the drawing is regenerated. The display of lineweights is not affected by the Fill mode setting.
