Use this dialog box to edit the observations of an existing named traverse or to enter traverse observations for a new empty traverse.
The left pane of the Traverse Editor displays the following properties for the selected setup within the current station point:
- Station Point
-
Displays the station point number.
- Backsight Point
-
Displays the backsight number.
- Backsight Direction
-
Specifies the backsight direction.
- Backsight Orientation
-
Specifies the orientation of the horizontal circle when backsighting the point.
- Instrument Height
-
Specifies the measured instrument height.
- Instrument Elevation
-
Displays the instrument elevation.
- Northing
-
Displays the northing value.
- Easting
-
Displays the easting value.
- Elevation
-
Displays the elevation.
- Latitude
-
Displays the latitude.
- Longitude
-
Displays the longitude.
In the right pane of the Traverse Editor you can enter observations for each Setup and specify the following;
- Name
-
Specifies a traverse station point name.
- Angle
-
Specifies the angle using the current Survey database units.
- Angle Type
-
Specify one of the following:
- Angle
- Deflection
- Face1 Angle
- Face2 Angle
- Azimuth
- Bearing-NE
- Bearing-SE
- Bearing-SW
- Bearing-NW
- None
- Distance
-
Specify the distance in the current Survey database units.
- Distance Type
-
Specify one of the following:
- Slope
- Horizontal
- None
- Vertical
-
Specifies the vertical type.
- Vertical Type
-
Specify one of the following:
- Vertical Angle
- Vertical Distance
- None
- Target Height
-
Specifies the target height.
- Target Type
-
Specify one of the following:
- Stadia
- Prism
- None
- Scale Factor
-
Specifies the scale factor.
- Description
-
Specifies a description.
- Easting
-
Displays the easting.
- Northing
-
Displays the northing.
- Elevation
-
Displays the elevation.
- Longitude
-
Displays the latitude.
- Latitude
-
Displays the longitude.