Use this tab to design the format and contents of the band style.
Title Text
Click the Compose Label button to change attributes of the band title, using the Label Style Composer dialog box.
Layout
- Band Height
-
Specifies the vertical dimension of the band in plotted units, which can affect readability of the contents.
- Text Box Width
-
Specifies the width (in plotted units) of the box that contains the band title.
- Offset From Band
-
Specifies the distance between the title box and the left side of the data band.
- Text Box Position
-
Specifies the location of the title text box with respect to the band: Left of Band or Right of Band.
Labels and Ticks
- At
-
Specifies the location type to be labeled, which varies according to the band style:
Profile Data Bands Style: major station, minor station, horizontal geometry point (HGP), vertical geometry point (VGP), station equation, or incremental distance.
Vertical Geometry Bands Style: uphill tangent, downhill tangent, crest curve, or sag curve.
Horizontal Geometry Bands Style: tangent, curve, spiral, or point of intersection.
Superelevation Data Bands Style: normal crown, level crown, reverse crown, full super, shoulder critical points, or slope transition region.
Sectional Data Bands Style: sample line station, incremental section data.
Pipe Data Bands Style: structure, pipe.
Pressure Network Data Bands Style: pressure pipe, fitting, appurtenance.
Cant Data: end level rail, begin full cant, end full cant, begin level rail, cant manual station, applied cant, equilibrium cant, and alignment critical points.Note: To add labels and ticks at alignment critical point stations, you must specify which geometry points to display in the Geometry Points to Label in Band dialog box.Speed: critical points, design speed, and design speed station.
Note: To add labels and ticks at critical point stations, you must specify which geometry points to display in the Geometry Points to Label in Band dialog box.Several label styles can appear in the same data band, but each one must be composed separately. Each appears in the preview as it is created.
- Full Band Height Ticks
-
Select if you want a line across the band for each tick.
- Small Ticks At
-
Select if you want smaller ticks. Select the tick location (Top, Middle, or Bottom of the band), and specify the tick size in drawing units.
- Compose Label
-
Click to review or change the label text, using the Label Style Composer dialog box.
- Anchor label to
-
Specifies how labels are anchored in Profile View Horizontal Geometry and Vertical Geometry Bands.
- Segment in Band anchors the label in the middle of the drawn segment, regardless of whether this is the true middle.
- True Geometry Location anchors the label to the true middle of the item being labeled. If this location is not shown in the profile view, the label components anchored to that point are not shown either.
- Schematic Line Option
-
For horizontal geometry data bands, specify what information is represented with schematic lines in the data band:
- Geometry shows curved lines where spirals and curves are located
- Radius shows angled lines for spirals and offset straight lines for curves. The line at the location of each curve is offset from the band centerline a distance directly proportional to the curve radius. For example, the line for a 100-radius curve is closer to the centerline than the line for a 1000-radius curve.
- Curvature shows angled lines for spirals and offset straight lines for curves. The line at the location of each curve is offset from the band centerline a distance directly proportional to the rate of curvature (inverse of radius). For example, the line for a 100-radius curve is farther from the centerline than the line for a 1000-radius curve.