To List a Survey Baseline Direction Using Inverse Point

To inverse a point from the Survey Command Window

1. In Toolspace, on the Survey tab, right-click the network to edit, and click Survey Command Window.
2. Click Baseline menu Inverse Point.
3. Type the start and end of the point range for which you want the station and offset information.
   Note: You must define the baseline as a prerequisite.

To inverse a point, using the survey command language

1. In Toolspace, on the Survey tab, right-click the network to edit, and click Survey Command Window.
2. At the Command line, enter:

   BL INV [point 1] (point 2)

Command Line Example

NE 1 1000 1000

STN 1

ZD 2 90 400

BL IS 1 2 100

BL PT 3 220 50

BL PT 4 270 -50

BL INV 1 4

This station and offset of points 1, 2, 3, and 4 are listed:

! Point Station Offset Elevation. Northing Easting

! 1 100.00 0.00 <Null> 1000.00 1000.00

! 2 500.00 0.00 <Null> 1000.00 1400.00

! 3 220.00 50.00 <Null> 950.00 1120.00

! 4 270.00 -50.00 <Null> 1050.00 1170.00

Command Syntax

BL INV [point 1] (point 2)