The PressurePipeRun type exposes the following members.
Methods
| Name | Description | |
|---|---|---|
 | AddBendByPI | Adds a bend by adding a PI to pipe run path with a specified point. |
| AddVerticalBendByPVI | Adds a vertical bend by PVI to pipe run profile with specified station and elevation. If there is no PVI at specified station and elevation, will add a new PVI to pipe run profile. |
| Break | Breaks the pipe run at a specified point and separate a new pipe run from it. |
| FollowProfile(ObjectId, Double, Boolean) | Makes the pipe run follow a specified profile. |
| FollowProfile(ObjectId, PressurePipeRunVerticalOffsetType, Double, Boolean) | Makes the pipe run follow a specified profile. |
| GetPartIds | Gets the objectId collection of all parts (pipe/fitting/appurtenance) belonging to this pipe run. |
| Merge | Merges a specified pipe run into the pipe run. |
| RemoveBendByPI | Removes a bend by removing a PI from pipe run path with a specified nearby point. |
| RemoveVerticalBendByPVI | Removes a vertical bend by removing a PVI from pipe run profile with specified station and elevation. |
| ResetReferenceProfile | Resets the reference profile to break relationship with the pipe run. |
| SetVerticalOffsetType | Sets the type of how the parts follow the vertical path (profile). |