Issues Resolved
Enhancements
| Data Output |
|---|
| Added the ability to output GUIDs on labels, reports, and worksheets. |
| Database |
|---|
| Added support for basic ancillary price and time table breakpoint types. |
| Framework |
|---|
| Added 64bit handle values in the API Item.GetFabricationItemFromACADHandle() method. |
| Usability |
|---|
| Added a user definable control in the service template to allow coupling limits to be changed for auto-fill scenarios. |
| Improved the message for the path repair tool when no results have been found. |
| Pattern |
|---|
| Improved the assignment of male and female notches when using slip and drive connectors on pattern 8. |
Fixed Issues
| Data Output |
|---|
| Fixed an issue with the straight pattern overrides so the straight settings match the cut type. |
| API |
|---|
| Fixed an issue in the API so that all parts are included when using the job.item call. |
| Fixed an issue in the API to improve performance when using WidthOrDepth and Depth properties and accessing AncillaryUsage. |
| Fixed an issue in the API which caused the Autodesk.Fabrication.Splitter.Sizes to be null. |
| Licensing |
|---|
| Fixed an issue with the manage license dialog to maintain focus so mouse clicks are correctly registered. |
| Manufacturing |
|---|
| Fixed an issue that prevented roller allowances to be added on oversize parts. |
| Fixed an issue to improve the detail lines when the insulation is set to 'wraps inside'. |
| Fixed an issue to improve the manufacturability of patterns 939, 959, 1125, 1127, and 1178 by preventing unnotched seam positions from being adjusted too far. |
| Fixed an issue to prevent ductboard patterns from developing incorrectly when either the connector notch is configured to 'Notch Out' or when the straight adjustment is 0. |
| Fixed an issue to prevent nested panels from overlapping when nesting segmented elbows. |
| Fixed an issue with damper holes when using double wall skins with connectors using different extensions. |
| Pattern |
|---|
| Fixed an issue on pattern 26 to correct the hole rotation. |
| Fixed an issue on pattern 330 to only warn of restricted flow once when configured to reduce the original cross section. |
| Adjusted pattern 8 (Square to Round) so it obeys the notch out setting in the connector notch section when unchecked. |
| Corrected the overall length on patterns 328 & 480 when using connectors with straight adjustments configured. |
| Fixed an issue to improve developments on patterns 943, 945,953, 954, 955 when using connectors configured with straight adjust values. |
| Fixed an issue to improve the accuracy of the LUKA area calculations on bend patterns when the angle is not 90 degrees. |
| Fixed an issue to improve the behavior of straights configured with calculated lengths to prevent length overwrite by the carry over. |
| Fixed an issue to improve the model geometry on pattern 834. |
| Fixed an issue to improve the seam developments when using a custom notch for the "Notch for Connector Split" setting in the notch section of the pattern options. |
| Fixed an issue to improve the square to round patterns (8, 28, 34, and 450) to ensure correctness when using a negative seam on S1 and either a non-corner seam position or center-configured width and depth offsets. |
| Fixed an issue to prevent notches from removing more material than expected. |
| Improved invalid geometry clues to highlight problematic options more accurately. |
| Corrected skewed dimension lines on the mitred offset patterns. |
| Fixed an issue with the dynamic hole feature to prevent holes from being lost. |
| Fixed an issue with the rectangular radius bend patterns to prevent the back wrapper from clipping when using non 90 degree seam angles. |
| Fixed an issue with the rectangular taper patterns so that the seam is notched out fully when configured to do so in the notch settings. |
| Usability |
|---|
| Corrected an issue in the edit part dialog that now accurately updates connector indicator positions when scrolling through sizes in the size dropdown. |
| Fixed an issue to improve stability when viewing NC data with the installed machines dialog open. |
| Improved product resilience by preventing areas of the user interface from reacting to user inputs while the manage license dialog is open. |
| Database |
|---|
| Fixed an issue so that adding new service templates no longer requires multiple clicks. |
| Fixed an issue to allow the modification of 'Fill Missing Tool Data' in the tools section of installed machines. |
| Framework |
|---|
| Fixed a sporadic issue that could lead to poor stability when browsing for scripts through the user interface. |
| Scripting |
|---|
| Fixed an issue to include seams and notches when exporting as a .dxf via scripting. |
| Interoperability |
|---|
| Fixed an issue to improve the DXF export with layers feature, allowing each tool to export a unique layer. |
| Other |
|---|
| Fixed an issue with folders to accommodate a period suffix on long paths. |