The geometry requirements (parameters) for a male non-threaded connector are listed below. The specification used in this example is “ASME B1.20.1”.
Note: All male connectors, except for male threaded connectors, will be created in only one way, which will be defined with a Diameter of 999 without any other data. Some common male connection types are Grooved, FTG, Spigot, Plain End, and Butt Welded.
| Parameter (Dimension) | Value |
| Diameter | 999 |
| Extension | = 0 |
| Snap Offset | = 0 |
| Body Thickness | = 0 |
| Body Length | = 0 |
| Body Set Back | = 0 |
| Swage Set Back | = 0 |
| Swage Length | = 0 |