| G3054 | WARNING: G3054 | THERE WERE n SEGMENTS CONVERTED IN CONTACT ELEMENT id |
| Cause: | Regular welded contact elements in the model were converted to offset welded contact because the initial gap was smaller than the tolerance specified by the SLINEOFFSETTOL model parameter but greater than the tolerance specified by the CONTACTTOL model parameter. | |
| Action: | If the welded connection has a consistent gap, consider using offset welded contact for better results. If the gap is not intentional consider removing it. | |
| Remarks: | See the Autodesk Nastran Solver Reference Manual, Section 5, Parameters section for entry format. |