- On the ribbon, click
Raster Tools tab
Insert & Write panel Dialog box launcher (
).
The Raster Design Options dialog box is displayed.
- Click the Image Defaults tab.
- Under Insertion Point, type default insertion point coordinates in the X and Y boxes. The precision of this point depends on the precision value in the AutoCAD Units Control dialog box.
- If you want to set an elevation for the frame, then type the elevation in the
Z box.
Note: This value is useful if you want to establish the elevation of a floorplan image, for example.
- In the Scale box, type a default scale. Image scale does not change the scale of the vector drawing.
- In the Rotation box, type a default rotation angle. The unit of measurement depends on the selected value in the AutoCAD Units Control dialog box.
- Under Density , in the Value box, type a default density. This is usually the scanned resolution. For example, if the majority of your images are scanned at 300 dots per inch, type 300 in this box.
- Under Density, in the Units box, type a default density unit. For example, if the majority of your images are scanned at 300 dots per inch, set Inches as the default.
- Under Vertical Units, select either Meters or US Survey Feet.
- Click OK to accept the defaults.