The PipePressureDropData type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | CategoryId | The category id of pipe curves. It will be OST_PipeCurves, OST_FlexPipeCurves, or OST_PlaceHolderPipes. |
| Coefficient | The coefficient of the pipe. |
| Density | The density of the pipe. Units: (kg/ft³). |
| Flow | The flow of the pipe. Units: (ft³/s). |
| FlowState | The flowState of the pipe. |
| Friction | The friction of the pipe. Units: (kg/(ft²·s²)). |
| FrictionFactor | The friction factor of the pipe. |
| InsideDiameter | The inside diameter of the pipe. Units: (ft). |
| IsValidObject | Specifies whether the .NET object represents a valid Revit entity. |
| KLevel | The system calculation level. |
| Length | The length of the pipe. Units: (ft). |
| NominalDiameter | The nominal diameter of the pipe. Units: (ft). |
| OutsideDiameter | The outside diameter of the pipe. Units: (ft). |
| PressureDrop | The pressure drop of the pipe. Units: (kg/(ft·s²)). |
| RelativeRoughness | The relative roughness of the pipe. |
| ReynoldsNumber | The reynolds number of the pipe. |
| Roughness | The roughness of the pipe. Units: (ft). |
| Velocity | The velocity of the pipe. Units: (ft/s). |
| VelocityPressure | The velocity pressure of the pipe. Units: (kg/(ft·s²)). |
| Viscosity | The dynamic viscosity of the pipe. Units: (kg/(ft·s)). |