Specify the area reinforcement types for your precast wall assemblies.
Click Edit on any of the Area Reinforcement types listed on the Reinforcement Types for Wall Parts page of the Configuration dialog. The opened dialog displays the name of the wall reinforcement type.
Precast Area Reinforcement Layers
The tabs on this dialog represent layers in the area reinforcement type.
- Click
to remove the currently active layer from the type.
- Click
to add a new layer to the type.
| Name | Description |
|---|---|
| Reinforcement Type | Specifies the type of the reinforcement layer. Either Steel Bars, Mesh, or Truss. Layer specific parameters are displayed below. |
| Position | Specifies the position of the layer. Either Outside, Inside, or Center. |
| Cover Offset | Specifies the offset of the reinforcement from the rebar cover of the host. |
Steel Bar Layer Parameters
| Name | Description |
|---|---|
| Convert to Custom Fabric Sheet | Creates a
Custom Fabric Sheet considering the input and verifying the constructability rules.
Note: The Custom Fabric Sheet will still be generated, regardless of its incompliance with constructability rules, but a warning message will be displayed, informing about the incompatibility cause.
|
| Rebar Area Inside | |
| Rebar Type | Specifies the internally positioned rebar standard size type. |
| Number | Only available when selected. Places a specific number of internally positioned rebar to fill the host. |
| Distance | Only available when selected. Places internally positioned rebar spaced a specific distance apart to fill the host. |
| Max. Distance | Only available when selected. Places internally positioned rebar spaced a maximum distance apart to fill the host based on the distance between the first and last bars. |
| Bar Direction | Either Horizontal or Vertical. Specifies the orientation of the internally positioned rebar in the host. |
| Bar Length Offset Start |  Specifies the offset from the beginning of the internally positioned rebar to the surface of the host.
|
| Bar Length Offset End |  Specifies the offset from the end of the internally positioned rebar to the surface of the host.
|
| Distribution Offset Start |
 Specifies the offset from the first internally positioned rebar to the surface of the host.
|
| Distribution Offset End |
 Specifies the offset from the last internally positioned rebar to the surface of the host.
|
|
|
| Rebar Area Outside | |
| Rebar Type | Specifies the externally positioned rebar standard size type. |
| Number | Only available when selected. Places a specific number of externally positioned rebar to fill the host. |
| Distance | Only available when selected. Places externally positioned rebar spaced a specific distance apart to fill the host. |
| Max. Distance | Only available when selected. Places externally positioned rebar spaced a maximum distance apart to fill the host based on the distance between the first and last bars. |
| Bar Direction | Either Horizontal or Vertical. Specifies the orientation of the externally positioned rebar in the host. |
| Bar Length Offset Start | Specifies the offset from the beginning of the externally positioned rebar to the surface of the host.
|
| Bar Length Offset End | Specifies the offset from the end of the externally positioned rebar to the surface of the host.
|
| Distribution Offset Start |
Specifies the offset from the first externally positioned rebar to the surface of the host.
|
| Distribution Offset End |
Specifies the offset from the last externally positioned rebar to the surface of the host.
|
|
|
|
| Shell (Double Walls) | Specifies one of the two concrete layers of the double wall. |
Mesh Layers Parameters
| Name | Description |
|---|---|
| Fabric Type | Specifies the mesh standard size type. |
| Longitudinal Offset Start | Specifies the offset from the beginning of the longitudinal rebar to the surface of the host. |
| Longitudinal Offset End | Specifies the offset from the end of the longitudinal bars to the surface of the host. |
| Transverse Offset Start | Specifies the offset from the beginning of the transverse rebar to the surface of the host. |
| Transverse Offset End | Specifies the offset from the end of the transverse rebar to the surface of the host. |
| Shell (Double Walls) | Specifies one of the two concrete layers of the double wall. |
Truss Layers Parameters (Double Walls only)
| Name | Description |
|---|---|
| Family | Specifies the truss rebar family. |
| Family Type | Specifies the truss rebar family type. |
| Number | Only available when selected. Places a specific number of truss rebar to fill the host. |
| Distance | Only available when selected. Places truss rebar spaced a specific distance apart to fill the host. |
| Max. Distance | Only available when selected. Places truss rebar spaced a maximum distance apart to fill the host based on the distance between the first and last trusses. |
| Shell | Specifies one of the two concrete layers of the double wall. |
| Distribution Offset Start | Specifies the offset from the first truss rebar instance to the surface of the host. |
| Distribution Offset End | Specifies the offset from the last truss rebar instance to the surface of the host. |
| Length Offset Start | Specifies the offset from the beginning of the truss rebar to the surface of the host. |
| Length Offset End | Specifies the offset from the end of the truss rebar to the surface of the host. |
| Distance to Opening |
 |
| Minimum Length | The length below which the lattice girders will not be created (depending on the parameters of the actual family). |