The RebarShapeTerminationsData type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
 | EndTreatmentTypeIdAtEnd | Identifies the end treatement type at the end of the rebar shape. Setting this property to a valid value, will set the HookAngleAtEnd to 0 and HasCrankAtEnd to false. |
| EndTreatmentTypeIdAtStart | Identifies the end treatment type at the start of the rebar shape. Setting this property to a valid value, will set the HookAngleAtStart to 0 and HasCrankAtStart to false. |
| HasCrankAtEnd | Identifies if the rebar shape has crank at end. Setting this property to true, will set the HookAngleAtEnd to 0 and EndTreatmentTypeIdAtEnd to ElementId.InvalidElementId. |
| HasCrankAtStart | Identifies if the rebar shape has crank at start. Setting this property to true, will set the HookAngleAtStart to 0 and EndTreatmentTypeIdAtStart to ElementId.InvalidElementId. |
| HookAngleAtEnd | Identifies the hook angle (in degrees) at the end of the rebar shape. The angle must be at least 0 and no more than 180. In case it is 0 it will be considered that the shape doesn't have a hook. Common values are 0, 90, 135, and 180. Setting this property to a value strictly greater than 0 and less or almost equal with 180 will set the HasCrankAtEnd to false and EndTreatmentTypeIdAtEnd to ElementId.InvalidElementId. |
| HookAngleAtStart | Identifies the hook angle (in degrees) at the start of the rebar shape. The angle must be at least 0 and no more than 180. In case it is 0 it will be considered that the shape doesn't have a hook. Common values are 0, 90, 135, and 180. Setting this property to a value strictly greater than 0 and less or almost equal with 180 will set the HasCrankAtStart to false and EndTreatmentTypeIdAtStart to ElementId.InvalidElementId. |
| IsValidObject | Specifies whether the .NET object represents a valid Revit entity. |
| TerminationOrientationAtEnd | Identifies the orientation of the termination (e.g. hook, crank) at end. The default value is Left. |
| TerminationOrientationAtStart | Identifies the orientation of the termination (e.g. hook, crank) at start. The default value is Left. |
| TerminationRotationAngleAtEnd | Identifies the termination's (e.g. hook, crank) out of plane rotation angle (in radians) at the end of the rebar shape. The default value is 0. |
| TerminationRotationAngleAtStart | Identifies the termination's (e.g. hook, crank) out of plane rotation angle (in radians) at the start of the rebar shape. The default value is 0. |