Modify wall part parameters to change the default connection parts for generating structural wall assemblies.
You change parts settings in the Configuration dialog. Click Precast tab 
Configuration panel
(Configuration) and navigate to the appropriate node for your wall:
Configuration panel
(Configuration) and navigate to the appropriate node for your wall:
- Concrete Wall Solid Wall Part
| Name | Description |
|---|---|
Lifters
 |
|
| Type | Specifies the lifting anchor and type for the precast wall. |
Minimum Distance to Edge
|
Specifies the minimum distance from the lifter to either edge of the wall. |
Minimum Top Distance to Opening
|
Specifies the minimum distance from the top of a lifter to any opening in the wall. |
| Tension Capacity | Specifies the rated tensile strength of the lifting anchor. |
| Side Lifters if Height Exceeds | Specifies the minimum wall height required before placing side anchors in the precast wall. |
Bracing Inserts
 |
|
| Type | Specifies the bracing and type for the wall connection. |
Distance Bracing Inserts
 and
|
Specifies the location of wall bracings as a distance from the upper edge or lower edge of the wall. |
| As Percentage of Wall Height | Select to use a percentage of the total precast wall height instead of specific units for the Distance Bracing Inserts parameter. |
| Position Bracing Inserts | Specifies where bracing inserts are placed. Select either None, On View Side, Opposite to View Side, or Both Sides. |
| Minimum Distance to Opening |  Specifies the minimum distance from the bracing to any opening in the wall.
|
| Connections | |
| Profile Frontal Wall Connection | Specifies the profile applied on the front/end of precast walls. |
| Profile Side Wall Connection | Specifies the profile applied on the sides of precast walls. |
| Profile T-Connection | Specifies the profile applied on the front/end of precast walls adjacent in a T-connection. |
| Horizontal Profile | Specifies the edge profile and type where precast walls are split horizontally. Either Horizontal Profile or Vertical Profile. |
| Nooses | Specifies the loop and type connection for precast walls. |
| Cast in Plate | Specifies the anchor plate and type for precast wall mounting. |